Quick Operations Owner's manual

4-18 Operation
9. In the Production Window, click on Run and then click on the Run Production button.
! This brings up the Run Window.
10. Click on Go to activate the dispensing process. See Figure 4-11
CAUTION! If the message “Clear conveyor before continuing” appears on the Monitor screen,
remove any workpieces from the Conveyor before clicking on OK.
Dots.fmw
Lines.fmw
Multipas.fmw
Program1.fmw
SR_Rectangle.fmw
Underfill.fmw
VVS.fmw
WCLine.fmw
Dots.fmw
Lines.fmw
Multipas.fmw
Program1.fmw
SR_Rectangle.fmw
Underfill.fmw
VVS.fmw
WCLine.fmw
Figure 4-10 Production Window – Load Program
Figure 4-11 Production Window – Run Program