Quick Operations Owner's manual

4-2 Operation
4. If a message to run a Valve Offsets routine appears, click on OK.
! A message should appear that indicates the dispensing system is being initialized.
5. When the FMNT Message 30416 - Dispenser Motor References Not Found (Figure 4-1)
appears, click OK to Home the Dispenser.
! The FmNT Main Window (Figure 4-2) will open.
6. Check to make sure the Dispensing Head is in the proper Home position.
" NOTE To start a production run, see “Running Production” later in this section.
Figure 4-1 FmNT Message 30416
Figure 4-2 FmNT Main Window