Quick Operations Owner's manual

Component Description 3-5

10. Fluid Syringe

The Fluid Syringe is mounted on the Dispensing Valve and contains the fluid to be dispensed. The fluid

manufacturer packages the fluid in the syringe according to your application requirements.

11. Dispensing Valve

The Dispensing Valve also referred to as a “pump” or “jet” is mounted on the Dispensing Head and

dispenses fluid onto the workpiece. Refer to the appropriate Dispensing Valve manual for additional

information.

Item Description Item Description

1 Dispensing Head 7

2 Electric/Pneumatic Bulkhead (for Valve 1)

Look Up Board Sensor (shown on rear rail

for clarity)

3 Camera and Lens 8 Stop Pin (dispense station)

4 Red/Blue Diffuse On-Axis Light 9 Height Sensor (tactile type shown)

5 Needle Sensor 10 Fluid Syringe

6 Purge Station 11 Dispensing Valve (DV-7000 shown)

Figure 3-2 X-1010 Dispensing Chamber Close-up