Manual

Detailed Descriptions of ACL Commands 3-1
3 Detailed Descriptions of ACL Commands
In the following descriptions, square brackets ("[" and "]") enclose optional parameters (i.e.
those which may be omitted so as to receive default values). Angle brackets ("<" and ">")
enclose the name of each parameter. The notation
ESC.X stands for an escape sequence.
The command parameters are shown separated by spaces. These spaces may be sent and
will not change the effect of the commands, except possibly to slow things down a bit due to
the transmission of the extra characters over the RS-232C interface.
In all of the examples, unless otherwise specified, it is assumed that the calibration factors
are 1.0000 in each axis and the resolution is 8.0000 microsteps per full step in each axis.
The ACL commands are presented in alphabetical order.