Manual

Escape Sequences 6-15
ESC.R Reset Handshake
Executing this command is the same as executing the following commands without
parameters:
ESC.@, ESC.H, ESC.I, ESC.M, and ESC.N. It has no effect on preceding
ACL commands; the input buffer is NOT cleared. (See
ESC.K.)
The following parameters are established by
ESC.R :
Hardwired DTR handshake enabled.
Block Size = 80.
System is in the Programmed On state.
Logical buffer size = 256.
Enquiry Character = 0 (no Enq/Ack handshake enabled).
Acknowledge String = 0 (no Acknowledge String).
Xon Trigger String = 0 (no Xon Trigger String).
Xoff Trigger String = 0 (no Xoff Trigger String).
Turnaround delay = 0.
Output Trigger Character = 0 (no Output Trigger Character).
Echo Terminate Character = 0 (no Echo Terminate Character).
Output Terminator = 13;10 (Carriage Return, Linefeed).
Output Initiator = 0 (no output initiator).
Intercharacter Delay = 0.
Immediate Response String = 0 (no Immediate Response String).
Xon Threshold = 128.
In addition, the communications error code is cleared.
See Appendix A Power Up Actions.