Owner manual
ACJ Series Applicator Systems
22
2000 Nordson Corporation
All rights reserved
303 810A
Issued 1/00
Manual 12-46
See Figure 7. This parts list covers both the ACJ-ST applicator without
heater and the ACJ-ST applicator with heater.
Item Part Description Quantity Note
— 329 361 Applicator, ACJ-ST 1
— 329 413 Applicator, ACJ-ST with heater 1
1 995 215
Adjuster, micro, ACJ
1
2 995 326
Nut, housing, ACJ
1
3 329 374
Solenoid, ACJ applicator
1
4 995 325
Cap, housing, ACJ
1
5 995 592
Plug, O-ring, ACJ
1
6 995 597
O-ring, ACJ, 3 mm
2 A
7 995 591
Sleeve, micro-adjust, ACJ
1
8 940 190
O-ring, 0.8125 x 0.9375 x 0.063 in.
2 A
9 321 093
Screw, socket head, cap, M3 x 14 mm
4
10 329 401
Interlock, pneumatic, ACJ-ST
1
11 - - - - - -
Body, ACJ-ST applicator
1
12 972 185
Connector, male, 0.125 in. tube x #10–32
1
13 246 072
Armature
1
14 329 371
Kit, spring, ACJ-S, ACJ-ST applicator
1
15 995 305
Needle and seat, ACJ-ST
1
16 329 398
Adapter, tube seal
1
17 329 392
U-cup, ACJ-ST
1 A
18 329 403
O-ring, ACJ-ST, 18 mm ID, Kalrez
2 A
19 329 390
O-ring, ACJ-ST, 14 mm ID
1 A
20 329 399
Retainer, seal, ACJ-ST
1
21 995 203
Retainer, female, ACJ-ST
1
22 321 092
Screw, socket head, cap, M3 x 8 mm
7 B
23 - - - - - -
Bracket assembly, syringe body, ACJ-ST
1
24 329 418
Tube, ACJ-ST applicator
1
25 - - - - - -
Cage, syringe support, ACJ-ST
1
26 329 373
Retainer, seat, ACJ-ST
1
27 971 248
Connector, 0.25 in. tube x 0.125 in. NPT
1
28 - - - - - -
Adapter, seat, ACJ-ST
1
29 329 415
Heater, with cordset, ACJ-ST
1 C, D
30 982 059
Screw, socket head, cap, M4 x 10 mm
2 C
31 - - - - - -
Adapter, ACJ-ST heater
1 C
NOTE A:Included in 329 369 kit, seal, ACJ-ST applicator.
B:Four screws are used on applicators without heaters.
C:Used only on 329 413 applicator with heater.
D:To repair, use 329 406 kit, ACJ heater replacement and 329 407 kit, ACJ RTD replacement.
ACJ-ST Applicators