User guide

AccuJet t Dispenser
17
E 1998 Nordson Corporation
All rights reserved
107 142B
Issued 4/98
Manual 12-34
Table 2 AccuJet Set-Points
Item Setting
Micro-adjust _______ mm
Preload _______ turns
Temperature
______/______ _C/_F
Syringe pressure ______/______ bar/psi
Solenoid pressure ______/______ bar/psi
WARNING: Allow only qualified personnel to perform the
following tasks. Follow the safety instructions in this document
and all other related documentation.
Follow these procedures to clean and maintain the AccuJet dispenser.
WARNING: Wear protective gloves and eye wear. Clean the
dispenser in a well ventilated area.
Clean the dispenser when you
S use another adhesive type
S perform maintenance
5. Maintenance