English Installation Supplement

3. Minimum Dimensions - Hearth
3.1 Nordpeis appliances do not raise the floor temperature enough to require a constructional hearth. These appliances can stand on a
superficial hearth which is a minimum of 12mm thick, see Diagram 1.
This is also referred to as a Floor Protector Plate or Floor Protector.
1
A
Thickness
*
B
B
Appliance
Decorative Hearth
Change in level to
mark safe perimeter
Front
3.2 If this appliance is installed in an elevated setting it is recommended to increase the front hearth depth to safely contain any falling logs
or embers. The higher the appliance is installed the deeper the hearth should be to avoid scorched floor coverings.
Freestanding Stoves
1. Installation Checklist
Before installation it is essential to ensure that a proper overview of the product performance and essential information required for
installing a freestanding appliance is undertaken.
2. Essential Information
Model Type Output
kW
Bergen Freestanding Stove 5.0
Duo Freestanding Stove 5.0
Uno Freestanding Stove 4.0
Smarty Freestanding Stove 4.0
Quadro Freestanding Stove 6.2
Orion Freestanding Stove 6.8
Recommended Fuels: Seasoned Wood (less than 20% moisture content)
As tested to the requirements of EN 13240 for intermittent operation
Model
Hearth
Thickness Front (A) Side (B)**
Bergen 12mm 225mm 150mm
Duo 12mm 225mm 150mm
Uno 12mm 225mm 150mm
Smarty 12mm 225mm 150mm
Quadro 12mm 225mm 150mm
Orion 12mm 225mm 150mm
*See section 4.2 for non-combustible materials.
See section 4.3 for combustible materials
**Check total hearth dimensions width are greater than minimum
840mm default values shown in ADJ.
8