User Manual

10 GB
1. Prior to assembling the insert 11
Chimney draught 11
Shared ue gas system 11
Air Supply 11
2. Technical information 11
3. Distance to combustible material 12
4. Assembly 12
Connection of the ue 13
Operational control 13
Painting the surround 13
5. Lighting the re for the rst time 13
6. Maintenance 14
Cleaning and inspection 14
Ashes 14
Thermotte™ plates 14
Door and glass 14
7. Warranty 14
8. Advice on lighting a re 15
Some advice in case of combustion problems 16
INDEX
IMPORTANT SAFETY PRECAUTIONS!
1. Please follow the installation manual when
connecting your stove / replace to the chimney /
ue pipe. If connected di󰀨erently from instruction
please, consider the heat radiation from the ue
pipe to the surrounding materials.
2. Before use, please carefully read the user manual
and follow the instructions.
3. Integrated or dened convection openings may
never be reduced or partially obstructed. This may
lead to overheating, which again can cause house
re or serious damage to the product.
4. Use only designated re starters. Never use
gasoline, diesel or other liquids to start the re.
This may cause explosions!
5. Never use other fuel than natural dry chopped
wood. Briquettes, peat, coke, coal and waste
from construction materials develops far higher
temperatures and emissions than natural wood.
Since your product has been designed for use
with natural wood only, other fuels may damage
the product, chimney and surrounding
constructions.
6. In case of damage to glass or door gasket, all use
of the product must be discontinued until the
damage has been repaired.
7. Products connected to a vented steel chimney must
never be operated with open or ajar door other than
reloading of wood or shortly during kindling process.
Failure to follow these precautions will leave your
warranty void and expose people and property to
danger.
Advise: Even if not required in your area, it is always
wise to have a qualied stove / replace tter do the
installation, or at least the nal inspection before use.