Operation Manual

15
104
C
87
95
96
16
16. Tighten a #8 x 1" Screw (102) with a Handrail
Plate (104) and a #10 Washer (103) into the Left
Outside Upright Cover (87) and into the bottom
of the left handrail assembly (C). Make sure
to orient the Handrail Plate as shown. Make
sure not to overtighten the Screws.
Press the Left Inside Upright Cover (88) against
the Left Outside Upright Cover (87) until they
snap together.
Repeat the steps above on the other side of
the treadmill with the Right Outside Upright
Cover (96) and the Right Inside Upright Cover
(95).
102
17. Tighten a #8 x 3/4" Screw (2) into the Left Inside
Upright Cover (88) as shown. Make sure not to
overtighten the Screw.
Next, tighten a #8 x 3/4" Screw (2) into the Right
Inside Upright Cover (not shown). Make sure
not to overtighten the Screw.
Firmly tighten the six 3/8" x 4" Screws (7) (only
one side is shown).
Press the Left Base Cover (82) and the Right
Base Cover (83) onto the Base (94).
17
83
82
94
7
103
88
103
104
102
2
2
88