Operation Manual

14
14. Attach the Pulse Crossbar (93) to the console
assembly with six #8 x 1/2" Screws (1). Start all
six Screws, and then tighten them.
Firmly tighten the four 5/16" x 3/4" Screws (4).
14
93
Console
Assembly
4
4
1
1
1
15. Check the gaps between the handrail assem-
blies (B, D) and the console assembly.
If necessary, loosen the four #8 x 3/4" Screws
(2) under the handrails. Next, slide the handrails
as needed to adjust the alignment of the hand-
rails and the console assembly. Then, retighten
the Screws.
Attach the Left Outside Upright Cover (87) and
the Right Outside Upright Cover (96) to the Left
and Right Uprights (89, 90) with two #8 x 3/4"
Screws (2). Rotate the Covers at an angle as
you press them against the Uprights. Do not
overtighten the Screws.
15
96
89
90
2
2
87
2
B
D
2
Console
Assembly