Datasheet

Page 121 of 161
nRF8001 Product Specification
Revision 1.2
24.19.4 Returned events
This command returns a CommandResponseEvent. It is then followed by a PipeStatusEvent
reporting the result of the procedure and an updated pipe bitmap identifying the service pipes available for
data transfer.
In case of a failed procedure execution, a
PipeErrorEvent is returned instead of the
PipeStatusEvent.
Data returned in the
CommandResponseEvent is:
• Command code:
OpenRemotePipe
• Status: Success / Status code
• Response data:
See Figure 32. on page 68
for an MSC illustrating the use of the OpenRemotePipe command.
24.19.5 Bluetooth low energy procedures used
This command uses the following GATT procedures
28
:
• Write Characteristic Value (CCCD configuration)
• Characteristic Value Notification (pipe without acknowledgment feature)
• Characteristic Value Indication (pipe with acknowledgment feature)
28.Bluetooth Core specification v4.0, Vol. 3, Part G, Chapter 4.2