Datasheet

AM9825A-L SWITCHING ADAPTOR SPECIFICATIONS
Ver: 0 Date: 2011/2/22 AMPLUS AM10267L.doc Page
4
1
RD
1
SPECIFICATION
The S.M.P.S should not be fired or emitted smoke by protection when the circuit is short.
The S.M.P.S can be changeable output voltage by changeable slot.
6. DC INSULATION RESISTANCE
Input – Output : 50MΩminimum (at 500VDC)
Input – Body metal : 50MΩminimum (at 500VDC)
7. DIELECTRIC WITHSTAND - VOLTAGE
Input – Output : 3750VAC minimum (2s)
Input – Body metal : 3750VAC minimum (2s)
8. MAIN FUSE
Input fuse is 2 OHM 1W fusible resistor
9. INRUSH CURRENT
Peak inrush current shall be limited to 10A for a cold start
10. TIME SEQUENCE
Time sequence should be satisfied to power ON/OFF, restart in
power failure
AC switch at ON/OFF
11. EFFICIENCY
The efficiency of the S.M.P.S must be satisfied the maximum 82%.
12. SAFETY STANDARD
To meet ETL-UL1950,CETL-C22.2 NO.950, GS-DIN EN60950
AS/NZS 4665.1 : 2005, EuP 2005/32/EC
100%V
95%V 95%V
≧20m S ≦1 .0S
AC input
DC onput