Datasheet

AM04151A SWITCHING ADAPTOR SPECIFICATIONS
Ver: 0 Date: 2011/2/22 AMPLUS AM10268.doc Page
7
1
RD
1
SPECIFICATION
RESULT: No cutting inner wire is acceptable
STEP1 STEP2
D. CORD BENDING TEST OF ADAPTOR SIDE
Test condition: 60’+60’=1 cycle, 30 cycle/1min, weight = 500g ,
from step 1 to step 2 continuously
Step 1. 500 cycle for difficult bending direction
Step 2. 500 cycle for easy bending direction
RESULT: No cutting inner wire is acceptable
E. INDIVIDUAL DROP TEST
Test condition: 6 face, each face 1 time 70 cm, on the 5mm wooden board.
RESULT: Without opening of case and crack, etc. electric characteristic shall be
satisfied.light crack after test is acceptable.
F. LOW TEMPERATURE STORAGE TEST
Keep on -30 (Packing) for 168 hours, and check the action after 3 hours in 25.
RESULT: All normal function and meet specification.
G. HIGH TEMPERATURE STORAGE TEST
Keep on +70 (Packing) for 168 hours, and check the action after 3 hours in 25.
RESULT: All normal function and meet specification.
H. HIGH HUMIDITY STORAGE TEST
Keep on +4595%RH (Packing) for 168 hours, and check the action after 3hour in 25.
RESULT: All normal function and meet specification.
I. TEMPERATURE CYCLE TEST
Keep on -45(Packing) for 1 hour, then keep on +85(Packing) for 1 hour
60
60'
60'
60'