Manualshelf

Datasheet

ManualsBrandsNordic Power ManualsExternal Plug In AdaptersPower Supply 12 ... 24 V 2.4 A/2.3 A/2.2 A/2.1 A/2 A/1.95 A/1.9 A/1.85 A/1.8 A/1.75 A/1.7 A/1.65 A
12345678
AM 0055H (09262H) SWITCHING ADAPTOR SPECIFICATIONS
Ver: 1 Date: 2011-05-28
AMPLUS
AM09262 Page
7
1
RD
1
SPECIFICATION
E. INDIVIDUAL DROP TEST
Test condition: 6 face, each face 1 time 70 cm, on the 5mm wooden board.
RESULT: Without opening of case and crack, etc. electric characteristic shall be satisfied.
light crack after test is acceptable.
F. LOW TEMPERATURE STORAGE TEST
Keep on -30 (Packing) for 168 hours, and check the action after 3 hours in 25.
RESULT: All normal function and meet specification.
G. HIGH TEMPERATURE STORAGE TEST
Keep on +70 (Packing) for 168 hours, and check the action after 3 hours in 25.
RESULT: All normal function and meet specification.
H. HIGH HUMIDITY STORAGE TEST
Keep on +4595%RH (Packing) for 168 hours, and check the action after 3hour in 25.
RESULT: All normal function and meet specification.
I. TEMPERATURE CYCLE TEST
Keep on -45(Packing) for 1 hour, then keep on +85(Packing) for 1 hour
Repeat this cycle until 10 cycle, check the action after an hour in 25.
RESULT: All normal function and meet specification.
J. CURRENT- CARRYING OF HIGH VOLTAGE TEST
Select power consumption at a standard load condition. The test samples shall be active with
input voltage is 280V/50Hz,50,48 hours, confirm its operation after left in the standard
condition for 1 hour.
RESULT:any case deformation, smoking, or burn by heat should not be found.