Installation Instructions

DISCHARGE TO RIGHT

STRAIGHT PLOWING

DISCHARGE TO LEFT

PLOWING ANGLE SETTINGS ARE SHOWN ABOVE. For plow

discharging to the LEFT or RIGHT of the operator rotate the plow

as shown, line up holes in the Pivot Brackets with the hole in the

Pivot Plate, feed T - Handle Quick Release Pins through the

appropriate holes.

Feed the Strap through the small slot at the top of the plow. Tie a knot in it (on the back side

of the plow blade) so it cannot be pulled through the slot. Bring free end of strap up to handle

bars. Pull on this strap to raise the plow.

NOTE: If your ATV is equipped with a winch, attach an eye bolt (not included) into the top of

the middle plow blade section, or drill a hole and attach your hook.

STRAP

T-HANDLE QUICK

RELEASE PINS

PAGE - 7