User's Manual

6.7 Charging the batteries

WARNING! Do not attempt to charge regular or alkaline batteries as this may cause

an explosion.

Charging batteries using the Desk Top Charger:

• Batteries must be correctly inserted inside the Hand Terminal.

• Please check that the Hand Terminal batteries are of a

rechargeable type (NiCd or NiMH).

• Check that the settings for the Hand Terminal have been

configured as follows:

MENU > ADJUSTMENTS > BATTERY > 0.

• Connect the power adapter to the power supply connector of the

charger (see picture above).

• Place the Hand Terminal in the Desk Top Charger.

• The Charging Indicator LED will remain ON during quick charging.

• The LED will start to blink when the battery is fully charged. The

light of the LED will then be reduced to indicate a trickle charge

current.

The RF650 is placed in the Desk Top Charger by holding the Hand Terminal

lightly with one hand and placing it gently on top of the Desk Top Charger. The

bottom part of the Hand Terminals casing fits the shape of the large opening on

top of the Desk Top Charger. Gently push the Hand Terminal down until the

connectors mate (a low beep followed by a high beep are generated from the

Hand Terminal if the Desk Top Charger is connected to a power supply, which in

turn is connected to a power outlet). See the picture below.