User's Manual

4 Introduction

This chapter contains an overview of the Nordic ID RF650 Wireless Data

Collection System, which consists of one or more RF650 Hand Terminal and one

or more RF650 Wireless Remote Access Platform (WRAP). The principle of

operation and the relation between the RF650 Hand Terminal and WRAP and the

Application Software running in the Host Computer are also shortly explained.

4.1 System components

The Nordic ID RF650 Wireless Data Collection System consists of three principal

components:

• Nordic ID RF650 Hand Terminal(s)

• Wireless Remote Access Platform(s) (WRAP)

• The Application Software, which runs on the Host Computer. Application

Software and Host Computer are not delivered by Nordic ID.

4.1.1 Versions of RF650

The RF650 is available in three different production versions:

• RF650 with Laser Scanner for bar codes

• RF650 with RFID for RFID tags

• RF650 with Laser Scanner and RFID both of the above

4.1.2 Product identification label and serial number

A product ID label is located inside the casing at the bottom of the rechargeable

battery holder. The label may be read by opening the battery cover and by

removing the batteries. Serial number can be used for tracing product

information and service history.