Nordic ID RF650 User’s Manual Version 1.
Nordic ID Copyright © 2004 All rights reserved. Nordic ID assumes no responsibility for any errors, which may appear in this manual. Furthermore, Nordic ID reserves the right to alter the hardware, software, and/or specifications detailed herein at any time without notice, and do not make any commitment to update the information contained herein. Updates to this manual may be checked from the Nordic ID Internet pages (http://www.nordicid.com).
Table of Contents 1 2 EC Declaration of Conformity.......................................................................................5 General information .......................................................................................................6 2.1 The purpose of the use of the Nordic ID RF650................................................6 2.2 Copyright and Disclaimer ..................................................................................6 2.3 Version information.........
5.15 Filling fields using the laser scanner................................................................23 5.16 Writing text in a field .......................................................................................23 5.17 Writing letters ..................................................................................................23 5.18 Removing letters ..............................................................................................23 5.19 Moving between fields.............
1 EC Declaration of Conformity Nordic ID hereby declares, that Nordic ID RF650 wireless data collection systems have been tested according to the standards EN 300 328-2 and EN 301 489-17. The equipment conforms to the essential requirements of the Directive 1999/5/EC. Salo 1.6.
2 General information 2.1 The purpose of the use of the Nordic ID RF650 The Nordic ID RF650 Hand Terminal (RF650) and Wireless Remote Access Platform (WRAP, Access Server) are designed to be used as a part of a Nordic ID Wireless Data Collection and Communication System in accordance with this User’s Manual. Any inappropriate use of the equipment for any other purpose is strictly prohibited.
Specific versions of RF650 Hand Terminal contain a Laser Scanner Module, an RFID reader/writer or both. The laser of the Laser Scanner Module is a Class II Laser, which are deemed safe for the use they are applied for in this product. User’s should never look directly into the laser and must refrain from directing the laser at the eyes of other persons or animals. It should also be noted, that some electronic sensors may be effected by laser light.
LASERSTRAHLEN NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT DER KLASSE 2 VARNING LASERSTÅLNING STIRRA EJ IN I STRÅLEN KLASS 2 LASER DANSK LASERLYF SE IKKE IND I STRÅLEN KLASSE 2 LASER ITALIANO LUCE LASER NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 FRANÇAIS LUMIERE LASER NE PAS REGARDER LE RAYON FIXEMENT PRODUIT LASER DE CLASSE 2 ESPAÑOL LUZ LASER NO MIRE FIJAMENTE EL HAZ PRODUCTO LASER DE LA CLASE 2 NEDERLANDS LASERLICHT NIET IN STRAAL STAREN KLASSE-2 LASER NORSK LASERLYS IKKE STIRR I
• Connect the equipment into an outlet on a circuit different from that to which the receiver in connected. • Consult the dealer or an experienced radio/TV technician for help. FCC NOTICE 1. Use only the power cord and connector cables supplied by Nordic ID to connect the equipment. 2. Use only shi elded cables to connect I/O devices to this equipment. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The products mentioned in this User's Manual are to be used only according to the instructions described in this manual. Faultless and safe operation of the products can be guaranteed only if the transport, storage, operation and handling of the devices are appropriate. This also applies to the maintenance of the products. To prevent damage to products please follow normal ESD related procedures when handling the products.
3 About this manual This User’s Manual contains information about the Nordic ID RF650 Hand Terminal and the RF650 Access Server (WRAP). Chapter ### Chapter 3 (About this manual) includes information about this manual and instructions on how to download the latest version of the manual via Internet. Chapter 4 (Introduction) contains an overview of the RF650 Hand Terminal and the RF650 Access Server.
4 Introduction This chapter contains an overview of the Nordic ID RF650 Wireless Data Collection System, which consists of one or more RF650 Hand Terminal and one or more RF650 Wireless Remote Access Platform (WRAP). The principle of operation and the relation between the RF650 Hand Terminal and WRAP and the Application Software running in the Host Computer are also shortly explained. 4.
4.2 Basic system operation The Hand Terminals communicate with the Host computer via the Wireless Remote Access Platform(s) (WRAP). The system can include one or more Hand Terminals and one or more WRAPs. A WRAP can be interfaced directly to the Host Computer using an RS232 interface, or indirectly via different networks (WLAN, GPRS etc.) with network cable or with third party adapters. The Hand Terminals can send/receive data to/from the Host Computer.
4.4 Communication between the WRAP and the Host Computer 4.4.1 Transaction Start The user of the Hand Terminal sends data to the HOST. The user has executed an action, e.g. pressed the OK-button or scanned a bar code.
• CRC value is received with the frame. It is needed for checking the cable connection between the WRAP and the HOST. This checking is necessary only when the RS232 cable connection is > 25 m. • The processing of two similar messages must be avoided in the HOST application. Depending on CRC, MN (message number) and ID (own IP number) values can be checked to detect if the frame is the same as the one already in process. 4.4.
5 Getting Started 5.1 Unpacking the unit Nordic ID products are packaged in carton boxes (boxes include the Nordic ID logo and colors). The standard package includes typically the RF650 Hand Terminal, rechargeable batteries (2 pcs), Desk Top Charger, the power supply for the charger with power cord and the connector cable for the Hand Terminal. The WRAP is packaged separately. The package contains the WRAP and the power supply together with the power cord. Please check the equipment upon arrival.
5.4 Resetting the Hand Terminal The Hand Terminal can be reset by pressing SHIFT+DEL (press SHIFT and while keeping the SHIFT-key down press DEL). The Hand Terminal will automatically reset when installing new batteries. During reset, the Hand Terminal will beep twice. 5.5 Symbols of the display Special symbols will be shown on the right side of the display depending on the function: SHIFTLOCK. This function will be ON or OFF by pressing the shift key. TRANSACTION.
5.7 Keyboard Key function table: Function with shift key (shift + key Key pressed at the same time ). Laser *** F1 F2 F3 F4 F5 *** *** *** *** *** OK Keylock ON / OFF 2 3 .
5.8 F-Keys The F-Keys F1 - F10 can be programmed to include recurring strings. The F-Keys function in two different ways: 1. By pressing an F-Key, a string is printed in the current field. If the length of the string exceeds the length of the field, the excess characters will be omitted. If the field already contains a text, this will be replaced by the new text. 2. By pressing an F-key, the string of characters is sent to the HOST. 5.
After locating the WRAP, the RF650 Hand Terminal and the WRAP will initiate the connection, and the display will show the following information: After the RF650 Hand Terminal and the WRAP have the connection defined and ready for data transfers between the RF650 Hand Terminal and the Host Application, the display will show the following initial display (for a short time): An initial display will always appear if no fields are defined.
NOTE! Usually the Host Application has been defined to take control of the display contents immediately after the connection between the RF650 and the WRAP has been established. 5.11 Setting the PIN-code Before the RF650 Hand Terminal can be used in a host application environment, the PIN-code of the Bluetooth system needs to be set on the Hand Terminal. Standard practice is that the system adminis trator sets the PIN-code on the Hand Terminal units.
Other Bluetooth devices apart from WRAP (such as mobile phones) may also appear on the list. The WRAP can be recognized by the name, which the system administrator has set for it. If there are no WRAPs listed when the text ”NO MORE BS” appears on the display, restart the search process by selecting [SEARCH]. Select a WRAP, which has the same PIN-code as the Hand Terminal, from the list and press OK. After selecting the WRAP the Hand Terminal will form a connection to the WRAP.
Depending on the application, the HOST can send fields to the Hand Terminal. These fields may be filled using the keyboard or the Laser Scanner (or RFID reader). Fields are typically underlined. 5.14 Locked fields Fields can generally be filled with text using the keyboard. An exception to this is caused by locked fields. When a locked field is active, the cursor is the same length as the field. A locked field cannot be read by the Laser Scanner (or by the RFID reader) either.
Letters may be removed from a field with the DEL key. An entire field can be cleared by pressing the DEL key for at least 0.5 seconds. 5.19 Moving between fields You can move between the fields using the arrow keys. By pressing the OK key, you can move to the next field. 5.20 Menu The settings of the Hand Terminal can be changed through the Menu. The Menu will be activated by pressing the keys SHIFT + 0. You can move in the Menu using the arrow keys. The desired item is selected by pressing the OK key.
The RF650 is available in three different versions (RF650 with Laser Scanner for bar codes, RF650 with RFID reader/writer for RFID tags and RF650 with both the Laser Scanner and the RFID reader/writer.
6 Desk Top Charger 6.1 General information The Desk Top Charger is used for charging the rechargeable batteries of the RF650 Hand Terminal. It is a fast charger, which reduces the charging time. Batteries are charged without removing them from the Hand Terminal. The charging procedure is directed through the Hand Terminal. 6.2 Safety information The Desk Top Charger includes several safety features. The software of the Hand Terminal includes a routine, which controls the Desk Top Charger.
6.4 Connectors The Desk Top Charger includes 3 connectors: • • • Hand Terminal connector Power supply connector RS232C serial connector RS232 serial connector 6.5 Power supply (7,5 VDC) Charging indicator Charging indicator The Desk Top Charger has a Charging Indicator (red LED light) located on the left side of the front part of the casing. See section 6.7 Charging the batteries. 6.
6.7 Charging the batteries WARNING! Do not attempt to charge regular or alkaline batteries as this may cause an explosion. Charging batteries using the Desk Top Charger: • • • Batteries must be correctly inserted inside the Hand Terminal. Please check that the Hand Terminal batteries are of a rechargeable type (NiCd or NiMH). Check that the settings for the Hand Terminal have been configured as follows: MENU > ADJUSTMENTS > BATTERY > 0.
NOTE! The Desk Top Charger may only be used with the Power Supply provided by the manufacturer. The Hand Terminal cannot be used during battery charging. It is normal for the base of the charger to warm during charging. 6.7.1 Audio signals and the Charging Indicator LED Charging indicator Quick charge Trickle charge The LED remains on The LED (red) blinks Audio signals Three successive beeps Charging not allowed (the Hand Terminal does not contain rechargeable batteries).
7 Installation and use 7.1 Basic installation of the RF650 Hand Terminal Basic Installation of the RF650 Hand Terminal is straightforward. Select a place for the Desk Top Charger, in which the Hand Terminal can be stored when not in use. Avoid direct sunlight, extreme temperatures and wet or humid surroundings. The RF650 is intended for indoor use. 7.2 Installation of the WRAP The WRAP should be installed according to the instructions in the pro duct manual for the WRAP.
8 Appendix The Appendix contains useful information, contact addresses and other additional information regarding the products mentioned in this User’s Manual or products otherwise useful in connection of using the RF650, WRAP or system.
8.1 Technical specifications of the RF650 Hand Terminal Technical Data Operating frequency 2400 to 2483.5 MHz (ISM radio band) Transmit power Power class 1 (+4 to +20 dBm) Antenna gain 0 dBi Data transfer rate 721 Kbit/s Asymmetric, 432.6 Kbit/s Symmetric Operating temperature 0 to +60 Celsius (32 to 140 Fahrenheit) Hand Terminal Size L x H x W 173 x 22(41) x 54 (79) mm Weight incl.
Product Highlights RS232 interface for connecting to external devices Highly ergonomic design Light weight and compact Easy to use one hand operation Integrated antenna 7 terminals communicate simultaneously with the WRAP (may vary depending on model) WRAP can also be used relay mode and in “site survey” mode Integrated barcode scanner and/or RFID reader/writer 8.
8.3 Minimum system requirements for software installation The specific requirements for the installation of the RF650 Hand Terminal into any system are based on the Bluetooth 1.1 Standard and require the use of a compliant WRAP (Wireless Remote Access Platform). The specific requirements for the installation of the WRAP (Wireless Remote Access Platform) into any system are based on the Bluetooth 1.1 Standard for the radio part and on the applicable network connection method (LAN, GPRS etc.).
8.5 Trademarks Nordic ID and Nordic ID logo are registered trademarks of Nordic ID Oy. All terms mentioned in this User's Guide that are known to be trademarks or service marks have been appropriately marked in the list below with either the ©, ® or the ™ symbol. Nordic ID cannot attest to the accuracy of this information. Use of a term in this User's Guide should not be regarded as affecting the validity of any trademark or copyright.
ITEM Scan repetition rate Laser power Laser Class Print contrast Scan angle Ambient Light Immunity • Sunlight • Artificial light SPECIFICATION 39 (± 3) scans/sec (bi-directional) 1.2mW nominal (Scanning Mode) 0.8mW nominal (Aim Mode) IEC Class 2 devices Minimum 25% absolute dark/light reflectance measured at 650nm 53º (typical) 10 000 ft. candles / 107.640 lux 450 ft. candles / 4.
8.
Verification Transmit Interleaved 2 of 5 Check Digit Convert Interleaved 2 of 5 EAN 13 Discrete 2 of 5 Set Length(s) for Discrete 2 of 5 Codabar Set Lengths for Codabar CLSI Editing NOTIS Editing MSI Plessey Set Length(s) for MSI Plessey MSI Plessey Check Digits Transmit MSI Plessey Check Digit MSI Plessey Check Digit Algorithm Transmit Code ID Character Table 5: 0x2C Disable 0x52 Disable 0x05 0x14 / 0x15 Disable 12 0x07 0x18 / 0x19 0x36 0x37 0x0B 0x1E / 0x1F 0x32 0x2E Disable 5-55 Disable Disab
8.8 Status messages of RF650 Hand Terminal International end-users of RF650 will see different kind of status messages on the bottom of the Hand Terminal screen. There is possible to change a language of status messages by changing configuration bit in eeprom memory. Space for the status message is one line and 20 characters. Characters sets of these languages are Latin-1.
8.12 “Connected! Connection with the WRAP has been established! 8.13 “Processing data! Host Application has processed data and the Hand Terminal is waiting for an answer. 8.14 “No answer from Host” If the Host Application doesn’t answer the “No answer from host” message appears and error beeps are also generated. 8.15 “Battery low” Warning is generated when a low battery status is detected.
8.16 Frequently asked questions Q: What are the specifications of the integrated laser scanner that RF650 has? A: It is a high quality laser scanner with a scan angle of 48 degrees, skew tolerance < 55 degrees and pitch angle < 65 degrees. The contrast ration is 30 %.
8.18 Sending the unit to service (Service Report Form) Before sending the unit to service, please contact Nordic ID Service or a Nordic ID Service Partner or Nordic ID Technical Support. Please have at hand the type of product in question, the serial number(s) of the product(s) and the software version.
HEADER _______________ (*) Service Report form Company name ____________________________________________________ Contact person _______________________________________________________ E-mail address ________________________________________________________ Telephone __________________________ Fax _____________________ Return address________________________________________________________ Invoicing address ______________________________________________________ Return method Date of purchase normal
The Manufacturer grants to the Product a warranty of one year. Manufacturer warrants that the Product is free from defects in materials and workmanship under normal use during the warranty period. The Product shall be returned to the Manufacturer for repair in such cases, as the Customer cannot remedy the problem of error in the unit. Each party will bear the cost of freight to the intended destination of the item to be repaired.
8.19 Contact information Nordic ID International Headquarters Nordic ID Sweden Nordic ID Oy Myllyojankatu 2 A FIN-24100 SALO FINLAND Nordic ID Stora Åsvägen 21 S-436 34 Askim SWEDEN Telephone: Fax: +358 2 727 7700 +358 2 727 7720 Telephone: Fax: +46 31 720 86 46 +46 31 700 86 95 Internet: Email: www.nordicid.com info@nordicid.com Internet: Email: www.nordicid.com info@nordicid.
