User's Manual

CHAPTER FIVE - CONECTIVITY
85
Assigning Static IP Address to WLAN Interface
When your network provides DCHP
service there is no necessity to configure
networking part of the WLAN communication.
By default the device expects to obtain IP-
address information from the local area
network to which the access point is attached.
If the DHCP service does not exist on your
WLAN infrastructure, or if you prefer to assign
a static IP address, using the ‘Network and
Dial-up Connections’ panel you may assign a
static IP address to the WLAN interface.
To assign
static IP-
address to
WLAN Interface:
1. Open the ‘Network and Dial-up Connections’
control panel applet (see the adjacent figure).
2. Double-tab the SDCCF10G1 icon in the panel
window, the IP address property sheet of the
WLAN interface opens on the display.
3. On the ‘IP Address’ page, select the ‘Specify an IP address’.
4. Enter your IP network information in their particular fields on the ‘IP
Address’ page. If need be, fill the fields on the ‘Name Servers’ page.
5. Tap on the ‘OK’ button; the static IP address is assigned to the WLAN
communication.