User's Manual

CHAPTER SIX- CONFIGURING AND ADMINISTERING

If you want to exit from the Registry Backup utility:

Press the ‘esc’ key.

Making Your Configuration Settings Permanent

If you want to make persistence of your configuration changes, you may use

the Registry Backup to store them permanently. Before you begin, open the

Registry Backup -utility, see ‘Accessing Registry Backup’.

Note! If you make changes to the system properties using control panel

applets, the volatility of the changes is not unambiguous after closing the

applet. As a general rule the settings modified by an applet are not

persistent. However, there are applets such as the Wi-Fi and the

Bluetooth Device Properties that incorporate setting features that makes

the changes permanent when the value is changed in the registry (for

background information, see the section ‘REGISTRY’ on page 26).

To make the changes in

Registry permanent:

1. Set keypad focus on the

‘Backup Registry’ button,

if not set, by using the ‘up-

arrow’ key

2. Press the ‘ok’ key

3. Wait until the Registry

Backup utility informs you

that it is finished with the

operation.

4. Press the ‘ok’ key to close

the message window

5. Set keypad focus on the

‘Quit’ button by the ‘down-

arrow’ key

6. Press the ‘ok’ key to close

the utility

Now your configuration settings are stored in the non-volatile memory.

Closing Registry

Backup