User Manual

5. PROGRAM | 15
• A “num” symbol in the top right corner of the display indicates that
Numeric Pad navigation is active.
ORGANIZE
The ORGANIZE (Shift + Program 4) view allows for moving or "swapping"
programs within the program banks.
ENTER THE ORGANIZE VIEW
1 Press ORGANIZE (Shift + Program 4)
SWAP TWO PROGRAMS
A Swap operation interchanges the positions of two programs.
2 Use the dial to select the program location which should be
swapped with another and press Swap.
3 Use the dial to select the destination and press Ok to complete the
Swap operation. Pressing Undo will instead cancel the operation.
MOVE A PROGRAM
4 Use the dial to select a program which should be moved to another
location and press Move
5 Select the destination location for the operation, using the dial and
press Ok. Pressing Undo will instead cancel the operation.
E Note that programs between the source and destination locations
are shifted one step up or down, changing which programs are
part of each page within the affected range.
M Programs can also be organized using the Nord Sound Manager.
MIDI LED INDICATOR
The MIDI LED, located below the Master Level dial, blinks as
incoming MIDI messages are received by the MIDI In port, or
over USB.
PANIC
If hanging notes are experienced when using the Nord Pi-
ano 4 in a MIDI setup, or if all sound should be terminated
for other reasons, use the PANIC (Shift + Program 5) func-
tion. This will execute an internal “All Notes Off” message,
and reset incoming CC messages.
158
Studio Grand 2 Med
Piano80
A:1-
Studio 80
num
Program Organize
A:11 Royal Grand 3D
A:12 Nefertiti Mk I
A:13 Amber Upright
A:14 Orch Strings
Swap Move
Program A:12
A:23 Mellow Upright
A:24 Nefertiti Mk I
A:25 Velvet Pad
A:31 Grand Imperial
Undo
Ok
Program A:12
B:41 Rays Reeds
B:42 Nefertiti Mk I
B:43 Pop Piano
B:44 Organ Flute
Undo
Ok
In this example, the Program 1 button has been pressed. The dash (-)
indicates that another digit can be entered, to select program 11-15.