User guide

SK 105E…175E Motor Starter Manual
8 Pre-series version BU 0135 GB-2713
1.3 Scope of supply
Standard version: IP55 (optionally IP66)
Operating instructions as PDF file on CD-ROM
including NORD CON (PC parameterising software)
Available accessories: Matching RJ12 to SUB-D9 adapter cable to connection to a PC
(Selection) RS485-RS232 conversion for connecting control boxes
SK CSX-3H, SimpleBox, 4-digit 7-segment LED display
SK PAR-3H, ParameterBox, plain text LCD display
Expansion module:
internal SK CU4-24V-123-B, internal 24V mains unit 1~ 230V
SK CU4-24V-140-B, internal 24V mains unit 1~ 400V
SK CU4-REL, internal setpoint converter with 2 relays
SK TIE4-SWT, direction selector switch module
External SK TU4-PBR, external PROFIBUS® module
2
SK TU4-CAO, external CANopen® module
2
SK TU4-DEV, external DeviceNet™ module
2
SK TU4-ECT, external EtherCAT® module
2
SK TU4-PNT, external PROFInet® module
2
SK TU4-POL, external POWERLINK® module
2
SK TU4-EIP, external Ethernet/IP™ module
2
SK TU4-24V-123-B, external 24V mains unit 1~ 230V
SK TU4-24V-140-B, external 24V mains unit 1~ 400V
SK TI4-TU-BUS or NET or MSW, connection unit TU4
SK TIE4-WMK-TU, wall-mounting kit TU4
SK TU4 MSW, external maintenance switch
NOTE: Details for the use of the relevant bus systems can be found in the applicable supplementary bus manual.
> www.nord.com
<
2
External bus modules can be used to control the motor starter via their additional digital inputs and outputs.
Parameterisation via the field bus modules is not possible!