Owner's manual

3.2 Control Module on Sprayer

1. Securely mount the control module (E01) on the sprayer near the CANbus connection.

2. Tee the CANbus interface cable (C40) in to the John Deere CANbus. Connect the 6 pin

Deutsch plug on cable C40 to the 2-way coupler (E12).

3. Connect cable C41 between the 2-way coupler (E12) and the end of the control module

with only one Deutsch connector.

4. Connect cable C30 to the CANbus connector. Connect the other end of C30 to an

appropriate power supply.

Figure 2: GS2 2600 Display Kit – Control Module on Sprayer