Installation Guide

6505 Gayhart Street, Commerce, CA 90040
Tel 323.767.2600 | www.noralighting.com | e-mail: nora@noralighting.com
© 2020 Nora Lighting, Inc. All rights reserved. Instructions subject to change without notice.
Installation Instructions
NELOCAC-16R Series
16" ELO LED Surface Mount Luminaire
021821P2
IS-NELOCAC-16R-R01
READ PRIOR TO ATTEMPTING INSTALLATION
ALWAYS TURN OFF MAIN POWER BEFORE INSTALLATION
INSTALLATION SHOULD BE CARRIED OUT BY YOUR LOCAL ELECTRICIAN
Note: Pendant Kit (NELOCAC-16PK) is not compatible with 4" square junction boxes
1. Turn off power.
2. Insert power cord from pendant kit (NELOCAC-16PK - ordered separately) through junction box bracket and adjust length accordingly.
Make electrical connections inside junction box (not included). Attach junction box bracket to junction box. (Figure 1)
3. Loosen strain relief and screw into junction box bracket through canopy. Tighten strain relief to secure pendant kit to junction box. (Figure 2)
4. Connect supply wires from the mounting bracket to the supply wires of the luminaire.
5. Secure the luminaire to the mounting bracket by rotating the luminaire clockwise. (Figure 3)
6. Installation complete.
PENDANT INSTALATION
Figure 1 Figure 2 Figure 3
REQUIRES: NELOCAC-16PK (Ordered Separately)
1
1
2
2
Junction box
plate
Canopy
Mounting
Bracket
Strain Relief
Power Cord