Manual

2
09/11 Rev. B 138709
Note: The exterior walls of the freezer may become quite warm as the compressor works to
transfer heat from the interior. Temperatures as much as 30°F (-1°C) warmer than room
temperature can be expected. It is particularly important in hotter climates to allow adequate space
for air circulation around the refrigerator.
ELECTRICAL
Check the proposed outlet to be used to insure that the voltage, phase, and current carrying
capacity of the circuit from the electrical panel correspond to the requirements of the cabinet.
NEVER
use an extension cord or adapter plug to wire any unit. Refer to the serial tag for all
pertinent electrical information.
The freezer must be plugged into its own 115 volt, 60 Hz, single phase outlet. The power cord of
the freezer is equipped with a three-prong grounding plug for protection against shock hazards. It
must be plugged into a properly grounded three-prong receptacle. The receptacles must be
installed in accordance with local codes and ordinances.
If voltage varies by more than 10%, freezer performance may be affected. Operating the freezer
with insufficient power can damage the compressor.
To prevent the freezer from being accidentally turned off, do not plug the unit into an outlet
controlled by a wall switch or pull cord. Do not pinch, knot or bend the cord in any manner.
Observe all Warning Labels. Disconnect power supply to eliminate injury from electrical
shock or moving parts when servicing equipment.
OPERATION
Cool Down Period
For safe storage of product, allow a minimum of 4 hours for the freezer to cool down
completely. The freezer will run continuously for the first several hours.
Electronic Temperature Control
•Temperature setting
The electronic temperature control is located outside the freezer. Temperature is
factory preset to provide satisfactory frozen storage temperatures. To adjust the
temperature setting, move the UP (∧ ) symbol for colder temperatures and DOWN
(∨ ) symbol for warmer temperatures on the control panel. Allow several hours for
the temperature to stabilize between adjustments. To turn off freezer, press DOWN
(∨ ) symbol until display shows “1”. Press three more times until display shows “0”.
To activate freezer, press UP (∧ ) three times until display shows “1” then press (∧ )
to desired setting. To keep the temperature setting from being accidentally changed,
the control may be locked. This is done by pressing “Alarm Reset” for 3 seconds. “L”
will then appear on display. To unlock the control, press “Alarm Reset” for 3 seconds. For the first
second, “U” will appear, and then the current temperature setting will appear.
• Temp Alarm
This feature is designed to provide a warning if the inside temperature exceeds 23°F. “HI TEMP”
feature operates on household electricity. It will not function if household electricity is interrupted.
• When the freezer is initially plugged in, the red “HI TEMP” indicator will be on and the buzzer will
sound. The indicator light will stay on until the freezer temperature is below 23°F. To silence the
buzzer, press the ALARM RESET button.