Manual

9-11
Chapter 9. LIST OF COMMUNICATION DATA
Bank
Item name RAM address EEPROM address RAM EEPROM
Decimal point
Remarks
Decimal
Hexadecimal Decimal Hexadecimal Read Write Read Write
information
Tag Tag 12 9312 2460 25696 6460 — Display and setting cannot
be made with the console.
Tag 13 9313 2461 25697 6461 — Same as above.
Tag 14 9314 2462 25698 6462 — Same as above.
Tag 15 9315 2463 25699 6463 — Same as above.
Tag 16 9316 2464 25700 6464 — Same as above.
PID P (Proportional band) (P-1) 12288 3000 28672 7000 1
I (Integral time) (I-1) 12289 3001 28673 7001 —
D (Derivative time) (D-1) 12290 3002 28674 7002 —
Manual reset (RE-1) 12291 3003 28675 7003 1
Output low limit (OL-1) 12292 3004 28676 7004 1
Output high limit (OH-1) 12293 3005 28677 7005 1
P (Proportional band)(cool) (P-1.C) 12336 3030 28720 7030 1
I (Integral time)(cool) (I-1.C) 12337 3031 28721 7031 —
D (Derivative time)(cool) (D-1.C) 12338 3032 28722 7032 —
(Reserved for future extension.) 12339 3033 28723 7033 ∆∆∆∆ 1
Output low limit (Cool) (OL1.C) 12340 3034 28724 7034 1
Output high limit (Cool) (OH1.C) 12341 3035 28725 7035 1
Event Internal Event 1 main setting 13056 3300 29440 7300 S
Internal Event 1 sub setting 13057 3301 29441 7301 S
Internal Event 2 main setting 13058 3302 29442 7302 S
Internal Event 2 sub setting 13059 3303 29443 7303 S
Internal Event 3 main setting 13060 3304 29444 7304 S
Internal Event 3 sub setting 13061 3305 29445 7305 S
Internal Event 4 main setting 13062 3306 29446 7306 S
Internal Event 4 sub setting 13063 3307 29447 7307 S
Internal Event 5 main setting 13064 3308 29448 7308 S
Internal Event 5 sub setting 13065 3309 29449 7309 S
LSP LSP1 13312 3400 29696 7400 P
LSP2 13313 3401 29697 7401 P
LSP3 13314 3402 29698 7402 P
LSP4 13315 3403 29699 7403 P
Instrument Typical alarm 14336 3800 30720 7800 X X — Bit 0: PV failure (AL01 to
status 1 03)
Bits 1 to 11: Undefined.
Bit 12: Hardware failure
(AL70)
Bit 13: Parameter failure
(AL95/97)
Bit 14: Adjustment data
failure (AL96/98)
Bit 15: ROM failure (AL99)
DO status 14337 3801 30721 7801 X X — Same as RAM address
9205 (decimal).
DI status 14338 3802 30722 7802 X X — Same as RAM address
9206 (decimal).
Instrument RUN/READY 14352 3810 30736 7810 X X —
status 2 AUTO/MANUAL 14353 3811 30737 7811 X X —
AT stop/start 14354 3812 30738 7812 X X —
(Reserved for future extension.) 14355 3813 30739 7813 ∆ X ∆ X—
PV 14356 3814 30740 7814 X X P
SP (Target value) 14357 3815 30741 7815 X X P
MV (Manipulated Variable) 14358 3816 30742 7816 X X 1