Manual

■ Output assign
The assign of four inputs (A, B, C, D) used for the output bit function can be set.
5-54
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
Item (Setting display/bank) Display Contents Initial value User level
Control output 1 Output
assign A (Setup setting/DO
Assignment bank)
0: Normally opened. (OFF, 0)
1: Normally closed. (ON, 1)
2: Internal Event 1
3: Internal Event 2
4: Internal Event 3
5: Internal Event 4
6: Internal Event 5
7 to 13: Undefined.
14: MV1
15: MV2
16 to 17: Undefined.
18: DI1
19: DI2
20 to 25: Undefined.
26: Internal Contact 1
27: Internal Contact 2
28: Internal Contact 3
29 to 33: Undefined.
34: Communication DI1
35: Communication DI2
36: Communication DI3
37: Communication DI4
38: MANUAL mode
39: READY mode
40: Undefined.
41: AT running
42: During SP ramp
43: Undefined.
44: Alarm occurs.
(AL0 1 to AL99)
45: PV alarm occurs.
(AL0 1 to AL03)
46: Undefined.
47: mode key pressing status
48: Event output 1 status
49: Control output 1 status
14
High function
Control output 1 Output
assign B (Setup setting/DO
Assignment bank)
0
Control output 1 Output
assign C (Setup setting/DO
Assignment bank)
0
Control output 1 Output
assign D (Setup setting/DO
Assignment bank)
0
Control output 2 Output
assign A (Setup setting/DO
Assignment bank)
15
Control output 2 Output
assign B (Setup setting/DO
Assignment bank)
0
Control output 2 Output
assign C (Setup setting/DO
Assignment bank)
0
Control output 2 Output
assign D (Setup setting/DO
Assignment bank)
0
Event output 1 Output
assign A (Setup setting/DO
Assignment bank)
2
Event output 1 Output
assign B (Setup setting/DO
Assignment bank)
0
Event output 1 Output
assign C (Setup setting/DO
Assignment bank)
0
Event output 1 Output
assign D (Setup setting/DO
Assignment bank)
0