Instruction Manual

2626 Visit our Web Site www.n-c.com
IntellIsys AdAptIve pressure Controllers
IQ+ OP-LIT 9/08
DATA COMPONENT BIT 7 BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 BIT 0
Comon exception
detail size
0 0 0 0 0 0 1 0
Comon exception
detail Byte #0
Reserved Real-time fault Reserved Data memory Non-volatile
memory
Code
memory
Microprocessor Diagnostic
Comon exception
detail Byte #1
Reserved Reset
exception
Mondify vendor Scheduled
maintenance
due
PS input
voltage
PS output
voltage
Reserved PS over
current
PCV Device exception
detail size
0 0 0 0 0 1 0 1
PCV Device exception
detail Byte #0
Process
variable
high †
S-Analog
Sensor
(2)
Process
variable
high †
S-Analog
Sensor
(2)
Process
variable
high †
S-Analog
Sensor
(2)
Process
variable
high †
S-Analog
Sensor
(2)
Process
variable
high †
S-Analog
Sensor
(2)
Process
variable
high †
S-Analog
Sensor
(2)
Process
variable
high †
S-Analog
Sensor
(2)
PProcess
variable
high †
S-Analog
Sensor
(2)
PVC Device exception
detain Byte #1
0 0 0 0 0 0 0 0
PCV Device exception
detail Blllyte #2
0 0 0 0 0 0 0 0
PVC Device exception
detail Byte #3
0 0 0 0 0 0 0 0
PVC Device exception
detail Byte #4
0 0 0 0 0 0 Status Discrete
Input Point (2)
Status
Discrete Input
Point (1)
Manufacturer
exception detail size
0 0 0 0 0 0 0 1
Manufacturer
exception detail Byte
#0
0 0 0 0 0 0 0 0
8.8 - Device Supervisor Object (continued)
TABLE 8.8.4 - S-DEVICE SUPERVISOR OBJECT EXCEPTION DETAIL
* Only used in the warning exception detail. This bit is always = 0 in the Alarm exception detail
† Warning and alarm levels for S-Analog Sensor Object are the full scale and zero sensor readings
†† Warning and alarm bits are set for S-Single Stage Controller when setpoint cannot be reached
NOTE: The bitmap for Warning exception
detail and Alarm exception detail is the
same.