Instruction Manual

23 Call toll free 800-824-4166 or 530-842-4457 • FAX [phone]
IntellIsys AdAptIve pressure Controllers
IQ+ OP-LIT 9/08
8.3 - DeviceNet Object
Class ID 3 hex
Instance ID 1
•
The values of attribute 1 and 2
are retrieved from NVRAM if
the front panel switches are set to
program mode; otherwise, the
value selected by the front panel
switch is reported.
•
The set service of attribute 1 and 2
directly updates the value for these
attributes in NVRAM. When setting
the MAC ID, the device will auto-
matically reset. To update baud rate,
a manual hardware or software reset
has to be executed.
•
The value of attributes 2 and 9 are
decoded as follows: 0=125Kb, 1=250Kb, 2=500Kb
8.1 - Identity Object
Class ID 1 hex
Instance ID 1
•
Vendor ID: Assigned number to
Nor-Cal Products Inc. is 612
•
Device type: The value of 1Dhex
is used for process control valve
(cf. specification One, Edition 3.3,
page 6-182)
•
Product code: Nor-Cal Products
attributes a specific product code
as a function of the valve size or
type.
8.2 - Message Router Object
Class ID 2 hex
Instance ID 1
No class or instance attributes supported.
TABLE 8.3.1 – DEVICENET OBJECT ATTRIBUTES AND SERVICES
ATTRIBUTE ID HEX SERVICE ID HEX NAME FORMAT VALUE
1 0E (get) 10 (set) MAC ID USINT 0-63 (from NVRAM in P mode)
2 0E (get) 10 (set) Baud Rate USINT 0-2 (from NVRAM in P mode)
5 0E (get) Allocation info Byte+Byte Allocation choice + master ID
6 0E (get)
MAC ID switch
changed
BOOL
0 = No Change,
1 = Change since last reset or
power-up
7 0E (get)
Baud rate switch
changed
BOOL
0 = No Change,
1 = Change since last reset or
power-up
8 0E (get)
MAC ID switch
value
USINT 0-99
9 0E (get)
Baud rate switch
value
USINT 0-9
None 4B Allocate master/slave connection
None 4C Release master/slave connection
TABLE 8.1.1 – IDENTITY OBJECT ATTRIBUTES AND SERVICES
ATTRIBUTE ID HEX SERVICE ID HEX NAME FORMAT VALUE
1 0E (get) Vendor ID UINT 612 (264 h) (ROM)
2 0E (get) Device Type UINT 00 1D (ROM)
3 0E (get) Product Code UINT 00 xx (NVRAM)
4 0E (get) Revision UINT(maj.)+UINT(min.) xx xx (ROM)
5 0E (get) Status WORD See table 8.1.2
6 0E (get) Serial Number 32 bits (6 digits) xxxxxx (NVRAM)
7 0E (get) Product Name String <=32 “INTELLISYS” (ROM)
None 05 (reset)
Invokes reset service: 0 = DeviceNet reset (default reset)
1 = out of box reset (NVRAM reset + DeviceNet reset)
64h = device power cycle
TABLE 8.1.2 IDENTITY OBJECT STATUS BIT
MAP
BIT DEFINITION
0
Owned
1 Reserved (=0)
2 Configured
3 Reserved (=0)
4-7 Extended device status
8 Minor recoverable fault
9 Minor unrecoverable fault
10 Major recoverable fault
11 Major unrecoverable fault
12-15 Reserved (=0)
8.4 - Assembly Object
Class ID 4 hex
Instance ID (see static assembly Table 9.5.1 and 9.5.2)
Get or set service selectively supported as a function of
the selected instance in the connection object.
TABLE 8.4.1 – ASSEMBLY OBJECT ATTRIBUTES
ATTRIBUTE ID HEX SERVICE ID HEX NAME FORMAT VALUE
3 0E (get) 10 (set) Data ARRAY Static assembly