Owner manual

4444 Visit our Web Site www.n-c.com
IntellIsys AdAptIve pressure Controllers
APC-OP-LIT 1/12
POWER SUPPLY
APC-PSM-DB15
For use with all DC powered APCs. 24 VDC, 2.5A power supply (100-240 VAC input). Includes
one CRD-PWR-US1 power cord and 6’ DC supply cable with DB15 D-sub receptacle connector
Model Number Matrix for Adaptive Pressure Controllers (APC)
Use the model number tree at right with the matrix below to define
a valid Nor-Cal Products adaptive pressure controller model number.
Choose one option from each column.
VALVE TYPE USER INTERFACE INPUT VOLTAGE COMMUNICATIONS OPTIONS
1 = Geared Throttling Buterfly Valve or
Universal Valve Drive (TBV or UVD)
00 = Standard. Buried Box
(limited switches & LEDs)
Blank = 100-240 VAC,
50-60 Hz
A = RS-232 + Analog/TTL Blank = None
2 = Direct Drive Throttling Buterfly Valve
(TBV)
50 = Graphic display / Touch screen.
Front panel
1
L = 24 VDC differential R = RS-485 + Analog/TTL
B = Battery backup
2
3 = Geared Drive Sealing Throttling
Buterfly Valves (TBVS)
D = RS-232 + DeviceNet
2
Sxx = Customer specific
model, xx = 01, 02, etc.
7 = Throttling Soft-Shut Valve (TSS)
8 = Throttling Pendulum Valve (TPV)
APPENDIX I – Spare Parts and Ordering Information
To make the completion of an Intellisys downstream pressure control system easy, Nor-Cal Products offers a comprehensive selection of cables and related accessories. These include signal
and communications cables, power cords, power supplies as well as spare parts.
POWER CORDS DIAGRAM # LENGTH DESCRIPTION
CRD-PWR-US1 1 7’ 10A-125V rated appliance cable.
CRD-PWR-US2 2 7’ 10A-250V rated appliance cable.
CRD-PWR-UK 3 7’ 10A-250V rated appliance cable. For use in the UK
CRD-PWR-EU 4 7’ 10A-250V rated appliance cable. For use in Continental Europe
SERIAL CABLES LENGTH DESCRIPTION
APC-CRD-RS232-10 10’ Connects any A/C powered APC to a standard PC or laptop DB-9 serial port
IQ-CRD-RS232-10 10’ Connects any DC powered APC to a standard PC or laptop DB-9 serial port
GAUGE CABLES LENGTH DESCRIPTION
CDG-CRD-10 10’ A/C powered APC-to-gauge cable, where gauge has 5-pole terminal block
CDG-CRD-DB9-10 10’ A/C powered APC-to-gauge cable, where gauge has DB-9 plug connector
CDG-CRD-DB15-10 10’ A/C powered APC-to-gauge cable, where gauge has DB-15 plug connector
CDG-IQ-CRD-10 10’ DC powered APC-to-gauge cable, where gauge has 5-pole terminal block
CDG-IQ-CRD-DB9-10 10’ DC powered APC-to-gauge cable, where gauge has DB-9 plug connector
CDG-IQ-CRD-DB15-10 10’ DC powered APC-to-gauge cable, where gauge has DB-15 plug connector
CDG-IQ-CRD-Y 1’
Y-cable to be used with DC powered APCs when two-gauge connection is
required. Use of this Y-cable also requires the use of CDG-CRD-10, CDG-CRD-
DB9-10 or CDG-CRD-DB15-10 cables.
VALVE CABLE LENGTH DESCRIPTION
TBV-CRD-10 10’ APC-to-Valve cable
BATTERY BACK-UP SPARE
APC-BAT-1518 Specially wrapped, 15-cell, 18 volt battery pack rated at 500 mA·H
Controller Cables and Accessories
Most cable and cord part numbers listed below end with the number 10 as a suffix, which represents the cable length, measured in feet. Thus, Nor-Cal’s standard cable length is 10’
(3m). However, any length between 1’ (0.3m) and 30’ (9.1m) can be supplied as a special request. Please contact Nor-Cal Products for price and availability information.
APC
Valve Type User Interface Input Voltage Battery BackupComm. Type
APC -PSM-DB15 Power Supply
Diagram 1
Diagram 2
Diagram 3
Diagram 4
AC Power Cord Plug Configurations
1
AC powered controllers only
2
DC powered controllers only