Owner manual

13 Call toll free 800-824-4166 or 530-842-4457 • FAX [phone]
IntellIsys AdAptIve pressure Controllers
APC-OP-LIT 1/12
TABLE 3.7.1 –
(J1) “IQD” DEVICENET
NETWORK CONNECTOR
PIN FUNCTION
1 Drain
2 Power In +
3 Power In -
4 CAN H
5 CAN L
1
4
3
2
5
AUXILIARY
GAUGE
TM
Valve Open/Close
membrane switches
Indicating LEDs
3.7 - DC Powered IQD Controlled Valve with Serial and DeviceNet I/O Interface
Refer to the following diagram and tables when connecting to an IQD controller including models TBV-IQD, TSS-IQD and TPV-IQD.
TABLE 3.7.3 – (J3) “IQD”
GAUGE CONNECTOR,
DB-9 RECEPTACLE
PIN # FUNCTION
1 Signal input from gauge 1
2 +15 V supply to gauge
3 -15 V supply to gauge
4 Not used
5 Signal input from gauge 2
6 Signal common from gauge 2
7 Not used
8 Signal common from gauge 1
9 Power supply common
TABLE 3.7.2 – (J2) “IQD”
AUXILIARY CONNECTOR,
DB-15 RECEPTACLE
PIN FUNCTION
1 Not used
2
RS-232 TX (data from IQ to
host)/485 (A)
3
RS-232 RX (data from host to
IQ)/485 (B)
4 Digital GND
5 Power RTN
6 Not used
7 Power +24V in
8 Not used
9 Analog CDG1 Out
10 Analog Valve Out
11 Analog GND
12 TTL Out Common
13 \Valve Open Out\
14 \Valve Closed Out\
15 Chassis GND