Owner manual

11 Call toll free 800-824-4166 or 530-842-4457 • FAX [phone]
IntellIsys AdAptIve pressure Controllers
APC-OP-LIT 1/12
2.51
5.74
5.69
4.78
Indicating LEDs
3.5 - DC Powered Controllers with Serial and DeviceNet I/O Interface
Refer to the following diagrams and tables when connecting to an D/C powered APC controller including models APC-100L-D, APC-200L-D, APC-300L-D, APC-700L-D and
APC-800L-D.
TABLE 3.5.1 –
(J1) “APC-X00L-D”
DEVICENET NETWORK
CONNECTOR
PIN FUNCTION
1 Drain
2 Power In +
3 Power In -
4 CAN H
5 CAN L
1
4
3
2
5
TABLE 3.5.2 – (J2) “APC-X00L-D”
AUXILIARY CONNECTOR,
DB-15 RECEPTACLE
PIN FUNCTION
1 Not used
2
RS-232 TX (data from IQ to
host)/485 (A)
3
RS-232 RX (data from host to
IQ)/485 (B)
4 Digital GND
5 Power RTN
6 Not used
7 Power +24V in
8 Not used
9 Analog CDG Out
10 Analog Valve Out
11 Analog GND
12 TTL Out Common
13 \Valve Open Out\
14 \Valve Closed Out\
15 Chassis GND
TABLE 3.5.3 – (J3) “APC-X00L-D”
GAUGE CONNECTOR,
DB-9 RECEPTACLE
PIN # FUNCTION
1 Signal input from gauge 1
2 +15 V supply to gauge
3 -15 V supply to gauge
4 Not used
5 Signal input from gauge 2
6 Signal common from gauge 2
7 Not used
8 Signal common from gauge 1
9 Power supply common
TABLE 3.5.4 - (J4) “APC-X00L-D”
VALVE CONNECTOR,
DB-15 RECEPTACLE
PIN
SIGNAL
ASSIGNMENT
1 Drive A+
2 Drive A-
3 Drive B-
4 Drive B+
5 Sense B-
6 Sense B+
7 Sense A-
8 Sense A+
9 Reserved
10 Reserved
11 Reserved
12 Reserved
13 Reserved
14 Reserved
15 Reserved