User guide
Table Of Contents
- Product Identification
- Validity
- Intended Use
- Functional Principle
- Trademark
- Patents
- Scope of Delivery
- 1 Safety
- 2 Technical Data
- 3 Installation
- 4 Operation
- 5 Deinstallation
- 6 Maintenance, Repair
- 7 Returning the Product
- 8 Disposal
- Further Information
- ETL Certification
- Declaration of Contamination
- EC Declaration of Conformity
CDG100-OP-LIT (2010-1) 9
1.3 General Safety Instructions
• Adhere to the applicable regulations and take the necessary
precautions for the process media used.
Consider possible reactions with the product materials.
• Adhere to the applicable regulations and take the necessary
precautions for all work you are going to do and consider the
safety instructions in this document.
• Before beginning to work, find out whether any vacuum com-
ponents are contaminated. Adhere to the relevant regulations
and take the necessary precautions when handling contamin-
ated parts.
Communicate the safety instructions to all other users.
1.4 Liability and Warranty
Nor-Cal Products assumes no liability and the warranty becomes
null and void if the end-user or third parties
• disregard the information in this document
• use the product in a non-conforming manner
• make any kind of interventions (modifications, alterations etc.)
on the product
• use the product with accessories not listed in the product
documentation.
The end-user assumes the responsibility in conjunction with the
process media used.
Gauge failures due to contamination are not covered by the
warranty.