User guide
Table Of Contents
- Product Identification
- Validity
- Intended Use
- Functional Principle
- Trademark
- Patents
- Scope of Delivery
- 1 Safety
- 2 Technical Data
- 3 Installation
- 4 Operation
- 5 Deinstallation
- 6 Maintenance, Repair
- 7 Returning the Product
- 8 Disposal
- Further Information
- ETL Certification
- Declaration of Contamination
- EC Declaration of Conformity
16 CDG100-OP-LIT (2010-1)
DANGER
DANGER: protective ground
Products that are not correctly connected to ground
can be extremely hazardous in the event of a fault.
Electrically connect the gauge to the grounded
vacuum chamber. This connection must conform to
the requirements of a protective connection ac-
cording to EN 61010:
• CF and VCR flanges fulfill this requirement.
• For gauges with a KF flange, use a conductive
metallic clamping ring.
• For gauges with a ½" tube, take appropriate
measures to fulfill this requirement.
Caution
Caution: vacuum component
Dirt and damages impair the function of the vac-
uum component.
When handling vacuum components, take appro-
priate measures to ensure cleanliness and prevent
damages.
Caution
Caution: dirt sensitive area
Touching the product or parts thereof with bare
hands increases the desorption rate.
Always wear clean, lint-free gloves and use clean
tools when working in this area.