Manual

CDG045-OP-LIT (2010-1) 21
4 Operation
Put the gauge into operation. If you are using a Nor-Cal con-
troller, define the measurement range.
A warm-up time of at least ½ hour should be allowed; for precise
pressure measurements a warm-up time of at least 2 hours is
required.
4.1 Status Indication
SP1
SP2
STATUS SP ZERO
LED
LED status
Meaning
<STATUS>
off
no supply voltage
lit solid green measurement mode
blinking green
short blinks
long blinks
warning
warming up
lit solid red
error
<SP1>
lit solid green
p
≤
setpoint 1
blinking green
waiting for setpoint 1 input
off
p > setpoint 1
<SP2> lit solid green
p
≤
setpoint 2
blinking green
waiting for setpoint 2 input
off
p > setpoint 2