20/06/2018 nontropical design | Humanoid Connection Guide In pub: 3 Smm stereo Jack from phone, tablet, computer, Bluetooth receiver or other device. Outputs 3.8mm (1787 stereo jack to audio stern like stereo receiver or amplifier computer speakers. LED: wire connection to WE2812 / WS28128 LED strip. No wires will be connected if you buy just the board, but if you buy an LED strip from us the Humanoid board will have a compatible wire harness connected for you. Power: BV, standard 2.
0/06/2018 nontropical design | Humanoid IMPORTANT: When connecting the LED strip to the Mazola, carefully pay attention to the labels for the connections (GND, DOUR, V). The Mazola DOUR connects to the LED strip *DI” or *DIN® connection. Do not assume that the wire colors will mate or that the order will match! The top-to-bottom ordering of connections on the Lamaze board Is GND, DOUR, BY, and this order may be different on your LED strip. If you buy an LED strip from us, the order will match.
20/06/2018 nontropical design | Humanoid 1. Random two-color scheme: Two random colors are chosen and are used to display the signal peaks. Over time, new colors will be chosen. Use the parameter knob to control how fast the color schemes change. I the parameter knob s set to the highest level, the colors will change constantly, therefore giving each signal peak a new color Setting the parameter to the midpoint s 2 good position for this color mode. 2.
