Product Manual

15
Using the WristOx
2,
Model 3150
Using the WristOx
2,
Model 3150
Installing Batteries
1. Open the battery compartment by sliding the battery door off the back of the
device (figure 4).
Figure 4: Remove Battery Door
2. Insert 2 new AAA alkaline batteries (figure 5). Battery orientation is shown inside the
battery compartment.
Figure 5: Insert Batteries
3. Replace battery door by sliding it back into place.
WARNING: Do not use the device when alarms are required.
WARNING: The USB cable must be unplugged from the device before replacing batteries.
WARNING: Before changing the batteries, make sure the device is off and the sensor
is not applied to a digit.