Product Manual

10
Introduction
Introduction
The Bluetooth-enabled WristOx
2,
Model 3150, is a small, wrist-worn device that displays,
measures, and stores patient SpO
2
and pulse rate data. The device includes a Bluetooth radio
with a range (spherical radius) of approximately 100 meters (328 feet).
The device ships ready to use in Spot Check turn on mode. In Spot Check turn on mode,
inserting a finger in the sensor automatically turns the device on. Approximately 10 seconds
after the finger is removed, the device enters Standby mode.
Advanced memory and programming features are available with Nonin’s nVISION
®
software
(version 6.3 or greater). See the “nVISION Software” section to learn more about using the
device with nVISION.
NOTE: If using the WristOx
2,
Model 3150 with 3rd party software, please disregard
nVISION information.
Unpacking the WristOx
2,
Model 3150
The WristOx
2,
Model 3150, standard or starter kit includes the items listed below. Once the
shipping carton is unpacked, verify these items were received. Contact the carrier immediately
if the shipping carton is damaged.
Standard Kit
• Model 3150, WristOx
2
Pulse Oximeter
• Model 8000SM-WO2, reusable soft sensor
• 1 wristband
• 2 AAA (1.5 volt) alkaline batteries
• Operator’s manual (CD)
• USB driver software (on operator’s manual CD) – required to use the PC USB interface
cable
Starter Kit
A starter kit is required to configure the device and download data to a PC. The starter kit
consists of the standard kit, plus:
• 3 wristbands
• nVISION SpO
2
data management software (CD)
• Model 3150SC, PC USB interface cable