Use and Care Manual

5
Step 14
Step 15
Step 16
Glazing of eaves and
skylight and stay bars to
push in completely (skylight
window important!)
Place door gable
in front and screw
down
Pull apart wedge sealing Pos.11 in
center!
Press sealing between oor prole
and glazing (inside of greenhouse!)
Screw down with round
connection sheet Pos.5
from inside with screws
M6x12+nuts.
Screw angle bracket Pos.6
in with screw 4,2x13
Build in doors and windows
Instruction see page 8-11
T-Sealings Pos.1, 4, 7, 3 for all doors & windows
(altogether 15 meter)
Attention! At skylight
window - owith the
side for insertion
into ridge!!!
Attention!
Press sealing
with the door
at the bottom
rst and then
screw down
rectangular
tube!
PVC-glider in frame of doors at bot-
tom, lateral and skylight stay bars
Hexagon bolts can be in-
serted later as well in the
area of the PVC-glider!
Tubing section Pos. 10 will be
pressed into oor prole. (as buf-
fer / sealing or protection against
dirt in oor prole).
Pos.2-1
Pos.2-2
Pos.1-1
Pos.1-9
Pos.1-9
Pos.3-3
Pos.1-2-1
Pos.1-3-1
Pos.2-3
Pos.2-3
Pos.1-2-1
Pos.3-1
Pos.2-2
Pos.1-4
Pos.1-5-2
Pos.3-1
Pos.1-4
Pos.1-5
Pos.4-2
Pos.4-1
Pos.1-6
Pos.1-7
Pos.1-8
Pos.3-2