Use and Care Manual
2
Dear garden friend,
Congratulations for the purchase of an aluminum greenhouse from .
The erection is simple. First read the mounting instruction and follow this step by step.
Parts and piece list
Start with the basic kit (please do not open all the boxes at the same time) and do not confu-
se about the numerous single parts. Before you start with the assembly please check with
the piece list, if all the parts are there. Every box is checked by a quality control before clo-
sing it and consequently missing parts can nearly be excluded. Should there be any lacking
parts, please state the mistake in position.
Location
Please choose, as far as possible, a sunny place for your greenhouse. Avoid the shadow
of buildings and trees. For vegetables like tomatoes, cucumbers and melons you have to
place your greenhouse in the Northern-Southern direction. For owers and pot plants it is
the Eastern-Western direction.
Attention:
If possible, the greenhouse should be set up at a wind-protected place and not in stor-
my weather. It is dangerous to have stand a partly assembled house.
An assembly according to the rules lets resist this greenhouse heavy wind. The manufacturer
is not responsible for any damages being arisen by improper assembly or acts of God!
The assembly must be executed by at least two persons!
Work with safe, proper tools and be careful for a secure standing of the ladder during the
assembly (danger of accident).
Do only work with gloves (danger of injury, danger of cutting)!
For the assembly you need the following tools:
1 pc screwdriver for recessed-head screws, size 2
1 pc open-jawed wrench 10 mm
1 pc screwdriver for slotted screws
1 pc Allan key 3 mm (in the bag of accessories for skylight)
1 pc water level
1 pc ladder
1 pc le to remove possible burs at the proles
1 pc rubber hammer
1 pc measuring tape