Instructions / Assembly

Fig.1： Use Bolt (BB) and Flat Washer (CC) to fix Panel (B) and Panel (A).

Fig.2： Insert Long side support pole (D) into pole (E), attach pole (D) and (E) by using Bolt (AA) and Flat

Washer (CC).

Fig.3： Attach Pole C&D&E to Panel (A) and Panel (B) by using Bolt (BB) and Flat Washer (CC).

Fig.4：Insert Corner connector (M&N) into panel (A) and (B).

Fig.5：Insert Pole (F) into Center Connector (J). (Notes: put the pole end with hole upwards as Fig 5-1 )

Fig.6：Insert end of Pole (F) into Corner Connector (M&N).

Fig.7：Insert Pole (G&H) into Center connector (J).

Fig.8：Fix Pole (G) to Short side Support Pole (C) and Fix Pole (H) to Long side Support Poles (D&E). Put

Big Canopy (Q) onto the Big Top, do not fully spread.

Fig.9：Insert Pole (I) into Center Connector (K).

Fig.10：Fix Pole (I) to Pole (F) by using by Bolt (BB), Flat Washer (CC) and Nut (HH)

Hardware Pack

￠6*180“7”Stake

16 PCS