Installation guide

5 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly

Assembling the beams

Attaching the beam connectors

□ Unfold the beam 2 (F) and insert the beam 1 (E) to the corner of

the screen. Then secure them by using the top buckle.

NOTE: To avoid destroying the finish, please handle it with

care.

□ Insert the beam connectors (C) into the beam 2 (F).

NOTE: To avoid destroying the finish, please handle it with

care

Attaching the top beams

Attaching the top beams to the

connector

□ Insert the top beams (B) into the beam connectors (C).

□ Insert the top end of the top beams (B) into the connect tube of

the top connector (A).

PAGE 1
Assembly 1 □ Assembling the beams 2 □ Unfold the beam 2 (F) and insert the beam 1 (E) to the corner of the screen. Then secure them by using the top buckle. Attaching the beam connectors Insert the beam connectors (C) into the beam 2 (F). NOTE: To avoid destroying the finish, please handle it with care NOTE: To avoid destroying the finish, please handle it with care. 3 □ Attaching the top beams 4 □ Insert the top beams (B) into the beam connectors (C).
PAGE 2
Assembly (continued) 5 □ 6 Attaching the middle beams □ Insert the middle beams (D) into the middle connect tubes of each screen 1 (E). □ Insert the middle beams (D) into the connect tubes of the top connector (A) and attach the hook (G). Place the big canopy (I) on top of the assembly, but do not unfold it. NOTE: To avoid destroying the finish, please handle it with care NOTE: To avoid destroying the finish, please handle it with care.