User's Manual

Data Transfer

Each time a measurement is stopped by connecting the Humotion DX5.0 with your computer’s USB

port recorded data is transferred automatically to your computer.

Progress of current data transfer is shown in the SmarTracks Diagnostics software.

NOTE: Do not unplug the USB cable from the Humotion DX5.0 before data has been transferred completely.

Unplugging during an active data transfer may lead to permanent loss of recorded data on the Humotion

DX5.0.

5.2. With Smart Run

The Smart Run App is available both on Apple App store and Google Play store for use on according

smartphones. Requirements for the smartphone are listed under section 1.

Data Recording

To record data a measurement has to be started and/or stopped on the Humotion DX5.0. To start and stop a

measurement:

1. Start the Smart Run app on your mobile device.

2. Link up the DX5.0 in the measurement device selection screen.

3. Press the central Start button in the app. Follow the instructions.

4. A measurement has been started and data is recorded on the Humotion DX5.0.

5. To stop the measurement, press the Stop button in the app.

Data Transfer

Depending on the settings data might be already transferred to the smartphone during a measurement. Data is

transferred automatically to your mobile device when a measurement is stopped by pressing the Stop button

in the app.

NOTE: Starting and stopping a measurement as well as data transfer requires an active Bluetooth connection

between the Humotion DX5.0 and the mobile device. If the Bluetooth connection is broken, the DX5.0 will

automatically try to reconnect.