User's Manual

4. Installation of SmarTracks Diagnostics

The Humotion SmarTracks Diagnostics software is either supplied on an USB stick, or you will be

given access details for the Humotion download server. Its intended use is on a PC with a Microsoft

Windows operating system Windows 8.1 or Windows 10.

To install SmarTracks Diagnostics when the software is supplied on a USB stick:

1. Connect the supplied USB stick.

2. Open the “SetupSmarTracks.msi” file.

3. Select “Next” and follow the rest of the instructions.

To install SmarTracks Diagnostics when the software is downloaded:

1. Download the setup file.

2. Depending on your operating system, you can get a notification screen about running an unrecognized

app.

3. Click “More info”.

4. Click “Run anyway” and follow the rest of the instructions.

NOTE: The software depends on Microsoft .NET Framework version 4.5 or higher. Please make sure

that an up-to-date Microsoft .NET Framework has been installed on your computer before starting

with the installation of SmarTracks Diagnostics. Further information can be found here:

https://www.microsoft.com/en-us/download/details.aspx?id=55170

5. Usage of Humotion DX5.0

5.1. With SmarTracks Diagnostics

Data Recording

To record data a measurement has to be started and/or stopped on the Humotion DX5.0. To start and stop a

measurement:

1. Plug the USB cable into your computer’s USB port. Plug your Humotion DX5.0 USB connector into the

other end of the USB cable.

2. SmarTracks Diagnostics will automatically recognize and display information about the

connected Humotion DX5.0.

3. Press ‘Start Measurement’ and fill out the required fields. Press ‘OK’.

4. Unplug your Humotion DX5.0 from the USB cable

5. A measurement has been started and data is recorded on the Humotion DX5.0.

6. To stop the measurement, plug the USB cable into the USB port of the Humotion DX5.0.

NOTE: The Humotion DX5.0 requires a minimum battery voltage of 3.8 V for recording measurement data. Do

not start any measurement when the battery voltage is lower than 3.8 V. Charge status of the battery is shown

in the bottom left of the SmarTracks Diagnostics software.