Installation guide

Installation (continued)

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Installing the soap dispenser

□ Insert the body assembly (M) through the

selected hole in the sink. Secure the body

assembly to the sink with the nut (N).

□ From under the sink, screw the bottle (O) onto

the body assembly (M) shank. Insert the pump

(L) down into the body assembly (M).

Making the waterline

connections

NOTE: The hot side inlet tube is indicated by a label.

If the label is not present, the hot supply tube is the longer

of the two inlet tubes.

□ Use 1/2 in. I.P.S. faucet connections (2), or use

supply line coupling nuts (3) (not included) with

a 3/8 in. O.D. ball-nose riser (1).

NOTE: Before tightening the faucet connector to the water

supply, apply a second wrench to the supply tube tting.

This will prevent the supply tube from moving or twisting

when tightening the faucet connector. Do not overtighten.