Installation guide

6
Installation (continued)
5
Securing the faucet assembly
□ Install the plastic washer (B), and metal washer
(C) onto the threaded mounting shank.
□ Thread the nut (D) onto the mounting shank.
Lock the nut (D) into position by tightening the
screws (P). Do not overtighten.
6
Attaching the quick connector
to the receiving block
□ Push the quick connector (J) rmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
□ After connecting the hose, install the weights (K)
at the point of the hose marking “weights here”.
B
C
D
P
Weights
here
Weights
here
K
1
J
Q
1
□ Remove the cap (Q) from the quick connect
tube (1).