User's Manual

Channel 3 / 4 Dual Rate Mode
Dual Rate Mode controls the behavior of the Dual
Rate setting for the channel 3 and channel 4
servos.
Changing the Channel 3 / 4 Dual Rate Mode
Use the navigation controls to change the dual rate mode as follows:
1. Access the top function menu
from the driving screen.
2. Navigate to the Channel 3 or
Channel 4 menu.
or then
3. Navigate to DR Mode.
or
Value Description
Both Dual rate affects travel in both direction
Throttle
Dual rate affects throttle travel only. Useful to limit
throttle inputs early in a run with an electric model. Only
meaningful if the servo mode is Thr/Brake.
4. Change the value.
or
Brake
Dual rate affects brake travel only. Useful to adjust
brakes on a nitro vehicle without affecting throttle travel.
Only meaningful if the servo mode is Thr/Brake.
Channel 3 /4 Servo Reverse
Servo reversing reverses the
direction the shift servo moves
upon receiving an input from the
grip buttons.
Changing the Channel 3 / 4 Servo Reverse Setting
Use the navigation controls to change the servo reverse setting as follows:
1. Access the top function menu
from the driving screen.
2. Navigate to the Channel 3 or
Channel 4 menu.
or then