User's Manual

To start the RC Desktop
From the START menu, click (All) Programs, Nomadio Digital RC Desktop, then
Nomadio Digital RC Desktop.
To make changes to the
settings
Navigate through the functions of the RC Desktop, and make changes as appropriate to
global settings, or to settings for individual models.
To open a saved settings file
From the File menu, click Open….
To save the current settings
into a file
From the File menu, click Save.
To create a new model
From the File menu, click Create New Model, or right click on the file name at the top of
the tree on the left, and select Create New Model.
To copy a model
In the tree on the left, right click on the model that you wish to copy. On the popup menu,
select Copy Model. A new model will be created that is a copy of the selected model
(though the name is not copied)
To delete a model
In the tree on the left, right click on the model that you wish to copy. On the popup menu,
select Delete Model.
To receive the current
settings from the React
1. Connect the React to your computer.
2. Turn on the React.
3. From the Connection menu, click Receive Settings from React.
To send the RC Desktop’s
current settings to the React
1. Connect the React to your computer.
2. Turn on the React.
3. From the Connection menu, click Send Settings to React.
To install the latest firmware
into the React
1. Connect the React to your computer.
2. Turn on the React.
3. From the Connection menu, click Install Latest React Firmware.
To update the RC Desktop to
the latest version
From the Help menu, click Software Updates.
Registration
1.When you start the Digital RC Desktop the first time, you will be prompted to register. Click Yes to
continue. If you click No, you can register you will be prompted again the next time you start the
Digital RC Desktop. You can register immediately by choosing the Help menu and then choosing
Register new React
.
2.The Digital RC Desktop will now read your React’s ID. Connect your React and click OK.