User's Manual

Channels 3 / 4 Servo Trim

Channel 3 and Channel 4 servo

trim adjusts the resting

(centered) positions of the

servos.

When initially setting up the

vehicle, the shift servo trim

setting should be set to 0. On the

servo, the servo horn should be

positioned as appropriate on the

servo.

On the driving screen, Channel 3

and Channel 4 servo trims are

represented by the position of the

pointers on the bottom bars.

Ch3 and Ch4 Trims

Changing the servo trim has the following visual effect on the driving screen bars:

Servo trim is centered in range (value = 0)

Servo trim is offset to high end (+ve value)

Servo trim is offset to low end (-ve value)

Adjusting Channel 3 / 4 Servo Trims

Use the navigation controls to adjust shift servo trim as follows:

1. Access the top function menu

from the driving screen.

2. Navigate to the Channel 3 or

Channel 4 menu.

or then

3. Navigate to Trim.

Value Description

0 Shift servo trim is centered within the

servo range.

-ve value

(-100 Æ -1)

Shift servo trim is to the LOW end.

4. Change the value.

+ve value

(1 Æ 100)

Shift servo trim is to the HIGH end.